DOEPFER A-190-2 Manual - Página 5

Procurar online ou descarregar pdf Manual para Sintetizador DOEPFER A-190-2. DOEPFER A-190-2 13 páginas.

Imprimir página

DOEPFER

4. Controls

Learn

This is a momentary switch that is used to adjust the

parameters of the A-190-2 in combination with Midi note,

control change or program change messages (e.g. Midi

channel, reference note, control change number, gate

polarity, retrigger on/off, key assign mode). Details in

chapter 5.

The learn button is also used to reset the module (i.e. to call

up the

factory settings). For this the button has to be

operated during power on of the A-100 system. Then the

system has to be turned off and on again (with about 10

seconds in the "off" state"). These are the factory settings:

•

Midi channel 1

•

reference note 36

•

trigger polarity: positive

•

retrigger: off

•

CV3: volume (controller #7)

•

CV4: modulation (controller #1)

•

CV1 characteristics: V/octave

•

key assign mode: highest note

System A-100

Glide

This is the glide control for the CV output "Note" (this

function is even called Portamento or Slew Limiting). In the

fully CCW position no glide appears, i.e. the control voltage

jumps when a new Midi note number is recognized. To

obtain the glide function the control has to be turned

clockwise until the desired glide time is reached.

Gate/Learn

The LED (light emitting diode) displays the Gate function in

the normal play mode. The LED can be used to control the

correct function of the module – even without having other

modules connected to A-190-2.

The LED is also used as Learn display after the Learn

button has been operated. Details in chapter 5.

Midi-to-CV/Gate A-190-2