DOEPFER Drehbank Manual do utilizador - Página 6

Procurar online ou descarregar pdf Manual do utilizador para Equipamento de música DOEPFER Drehbank. DOEPFER Drehbank 8 páginas. Midi controller box

by a long flash of the L.E.D. This flash is important, because if you trigger a Snapshot

accidentally ( or at the wrong time) you could overload the Midi connection.

Once the Snapshot has been sent the Drehbank returns to bank indicator mode.

Important

If you change your mind and don't want to send a Snapshot (or if you go into the

mode by accident) just wait until the L.E.D. stops blinking, (after one second)

Remember

A Snapshot sends the controller values of all 64 knobs from the active bank.

External control inputs (6)

If you have a unit fitted with the optional external control inputs, you will find the 8 external

inputs at the rear of the unit (labelled external inputs)

The 8 external inputs are assigned to the following control knobs;

External input

(at rear, left to right)

When you turn on the

complete presets already available.

These are:

The Fixed ROM Presets, which are found on the EPROM, with the operation software of

Drehbank

the

, but this can only be altered by updating the EPROM.

Note:

The layout of ROM preset 1 is printed in the appendix. Information on ROM presets

2, 3, and 4 is found in the README.TXT file. (on the CD)

- The Changeable non-volatile EEPROM Preset. This preset is located in the internal

non-volatile memory (EEPROM) and will under normal operating conditions be loaded into

the work buffer (RAM).

Drehbank

Control knob on front

panel

Drehbank

without going into the editor program you'll find several

Default settings

Control voltage

Foot controller

Page 6

Short Manual