Dog Care WELL-D LE TC08 Manual de início rápido

Procurar online ou descarregar pdf Manual de início rápido para Produtos para animais de estimação Dog Care WELL-D LE TC08. Dog Care WELL-D LE TC08 4 páginas. Dog training collar

Imprimir página

DogCare WELL-D LE Dog Training Collar (Model: TC08) FAQ's

1. Can't turn on Remote.

Please make sure the remote is charged. Plug the charging cable into the port at the

bottom of the remote and the other end into a working power outlet. Charging should

take about 2 to 3 hours. (It is suggested to charge only for 2 to 3 hours to preserve longer

battery life).

b. After charging, twist the intensity dial clockwise. The dial can be found on the front top

right of the remote. The LED light will briefly flash green.

c. To turn off, align the power icon with the status LED light.

2. Can't turn on the Receiver.

a. Please make sure the Receiver (collar) is charged. Plug the charging cable into the port at

the bottom side of the receiver and the other end into a working power outlet. Charging

should take about 2 to 3 hours. (It is suggested to charge only for 2 to 3 hours to preserve

longer battery life).

Press and hold the ON / OFF button on the top of the Receiver until the collar makes a

double beep and vibrates (press it hard).

3. The Receiver/Collar does not respond.

a. Make sure the receiver and the remote are both charged and have enough power.

b. Make sure the receiver and remote have been paired. (See #4).

c. Check if both units are turned ON.

d. If you have more than one (1) receiver/collar, make sure that the receiver is on the

corresponding channel. (Test the different channels if necessary by changing the channel

with the button on the right and pressing the beep or vibrate button to confirm. Re-pair if

necessary).

e. Press the beep or the vibrate button to test if the receiver is responding. (To test the

shock see # (7) below).

4. How to "Pair" the Receiver/Collar with the Remote Control.

a. The remote and receiver have been paired at the factory. Channel Display is "1".

i. To start, make sure the Receiver/Collar is turned OFF. To turn it OFF press and

hold the ON/OFF button on the top of the collar until it beeps and the indicator

will flash a red light.

WELL-D LE

Dog Training Collar

(Model: TC08)