Dog Care WELL-D LE TC08 Manual de início rápido - Página 2

Procurar online ou descarregar pdf Manual de início rápido para Produtos para animais de estimação Dog Care WELL-D LE TC08. Dog Care WELL-D LE TC08 4 páginas. Dog training collar

Imprimir página

ii. Make sure the remote is turned ON. Twist the intensity dial clockwise. The dial

can be found on the front top right of the remote. The LED light will briefly

flash green.

iii. Press and hold the ON/OFF button on the collar until the light "quickly" flashes

green. (Don't let go even if the collar beeps)

iv. Then, on the remote, press and hold the vibrate and the beep buttons

simultaneously for about 3 seconds until the LED light on the remote flashes

green.

v. If pairing is successful the Status LED light on the collar will flash green twice,

emit a beep sound, and vibrate.

vi. You can test by pressing the beep or vibration buttons.

5. To Pair Additional Collars to the Remote. (TC08 can pair up to 2 collars on 1 remote).

i. The collar should be turned OFF. Press the ON/OFF button on the top of the

collar for 3 to 5 seconds. The indicator will not flash when it is off.

ii. The remote should be ON. Twist the intensity dial clockwise.

iii. Toggle the channel switching button and select channel 2.

iv. Hold the ON/OFF button on the collar for about 5 seconds until the light

alternately flashes green and red.

v. You can test by pressing the beep or vibration buttons.

6. What does the security key lock function do?

a. The security lock button is located on the left side of the remote. It locks or unlocks the

remote. In the locked position it will prevent the remote from working and from shocking

your dog if a button on the front of the remote is accidentally pushed.

b. Note that the locked position will lock the entire Remote Control keypad.

7. How do I test the shock?

a. Make sure the receiver and remote are charged.

b. Adjust the static/shock level to 1. (You should feel something at this level but it won't be

too powerful).

c. To adjust the shock level twist the intensity dial clockwise.

d. To test the shock both prongs must be in contact with the skin. (It is suggested to test on

your right forearm at about level 1).

e. When both electrodes/prongs are in contact with your skin, make a quick press to the

shock button (orange button). Don't hold down the button, and don't press it multiple

times, just one Click.

You can adjust the level up to 2 or 3 if you don't feel anything.

g. If the shock is still not working you should try to re-pair the collar (#4). Then try the above

steps again.

8. Shock Setting does not seem to work on my dog.

a. Both electrodes (prongs) must be touched simultaneously for the shock to work.

b. You may want to change the shock levels. Start at 1 and go up by 1 each time when testing

to see if it has an effect on your dog.

c. If your dog has a thick undercoat you may need to separate the fur to make sure that both

electrodes are touching their skin.

d. You may need to trim some of the fur to make sure your dog's skin touches both prongs.