ASGCO BC-2 Instruções de instalação, operação e manutenção - Página 9
Procurar online ou descarregar pdf Instruções de instalação, operação e manutenção para Equipamento industrial ASGCO BC-2. ASGCO BC-2 9 páginas. With bolt-up tensioner system
Imprimir página
Problem
Excess vibration of the scraper.
Excess carryback.
Excess belt movement, cupping.
Unable to tension scraper properly,
belt moves away from blades.
Frozen material on scraper.
Make certain all bolts are tight. If the belt is non-reversing, rotate the blade about 5°
degrees in the direction of the belt movement.
Check for proper Scraper tension. Put additional tension on cleaner.
Check for wear on the cleaning tip.
Check thickness of carryback. If the cleaner must remove more than about 1/8" of material then an
additional cleaner may be needed
Install a hold down roller to stabilize the belt surface.
Install a hold down roller to reduce sag of the belt when tensioning.
Place heaters near scraper to melt frozen material. Or shut off the belt lock it out, test that the belt
does not turn on, and chip debris off. CAREFULLY . Use caution not to burn belt or cleaner.
BC-2™ TROUBLE SHOOTING
Solution
BC-2
w/Bolt-Up
™
Tensioner
™