ASGCO BC-2 설치, 작동 및 유지보수 지침 - 페이지 9

{카테고리_이름} ASGCO BC-2에 대한 설치, 작동 및 유지보수 지침을 온라인으로 검색하거나 PDF를 다운로드하세요. ASGCO BC-2 9 페이지. With bolt-up tensioner system

Problem

Excess vibration of the scraper.

Excess carryback.

Excess belt movement, cupping.

Unable to tension scraper properly,

belt moves away from blades.

Frozen material on scraper.

Make certain all bolts are tight. If the belt is non-reversing, rotate the blade about 5°

degrees in the direction of the belt movement.

Check for proper Scraper tension. Put additional tension on cleaner.

Check for wear on the cleaning tip.

Check thickness of carryback. If the cleaner must remove more than about 1/8" of material then an

additional cleaner may be needed

Install a hold down roller to stabilize the belt surface.

Install a hold down roller to reduce sag of the belt when tensioning.

Place heaters near scraper to melt frozen material. Or shut off the belt lock it out, test that the belt

does not turn on, and chip debris off. CAREFULLY . Use caution not to burn belt or cleaner.

BC-2™ TROUBLE SHOOTING

Solution

BC-2

w/Bolt-Up

™

Tensioner

™