CLOROX CLX1000 Manual do operador - Página 7

Procurar online ou descarregar pdf Manual do operador para Pulverizador de tinta CLOROX CLX1000. CLOROX CLX1000 12 páginas. Electrostatic sprayer

Imprimir página
CLOROX CLX1000 Manual do operador

SYSTEM COMPONENTS

The patented Clorox Total 360™ Electrostatic Sprayer was engineered
with the end-user in mind. It is a durable, highly mobile and incredibly
effective for electrostatic delivery.
Clorox Total 360™ Base Unit
6
5
4
14
1
Air Compressor
2
Non-Marking Wheels
3
Sprayer Connect Line
4
Air Filter
5
Sprayer Holster
6
Adjustable Handle
7
Peristaltic Pump
8
Circuit Breaker
9
Main Power
Switch
10 1-Gallon Chemical
Containers
11
Extension Cord Holder Located at the rear of the unit for
12
Frame
13
Pump Purge
Switch
Handle Adjust
14
Buttons
15
Sprayer Electrical
Disconnect
10
1
12
2
Atomizes and propels the liquid. Runs
on 115-volt power. Includes built-in
auto resetting thermal safeguard
against compressor overheating.
Large wheels, for easy transport and
maneuverability, will not leave scuff
marks. Do not require inflation.
Connect line consists of four
components: electrical line, liquid line,
air line and stainless steel braided
cable. The connect line connects the
sprayer to the base unit.
User-replaceable air filter that filters
out particles from incoming air.
Holds the sprayer.
Handle position is raised, lowered and
rotated by the two button snaps.
Provides liquid up to sprayer.
User resettable circuit breaker and will
only trip if a short occurs in the base unit.
Powers system to a ready state.
Chemical containers (not included
with equipment).
extension cord storage.
Stainless steel frame and hardware
design for long-term durability.
Purges product from liquid line.
(press to purge)
Adjusts handle height.
(squeeze to adjust)
Electrical connection for Sprayer.
Clorox Total 360™ Sprayer
3
11
4
7
15
13
8
9
1
Trigger Button
2
Instrument Panel
3
Nozzle Cover
4
Sprayer Grip
5
Sprayer Connect

Nozzle

The nozzle assembly is located at the end of the sprayer. It is
composed of a spring-loaded contact, external O-ring, nozzle
cover, liquid tip and electrode. These are the only user-serviceable
components. To access the nozzle components, unscrew the nozzle
cover counterclockwise by hand. It is very important to follow all the
maintenance and cleaning procedures to ensure that the sprayer will
function optimally. After servicing nozzle, it is extremely important to
return the nozzle to its seat position and avoid overtightening.
NOTE: As the sprayer becomes dirty from typical use, a 70% isopropyl
alcohol cleaner that is manually applied is recommended on the
outside surfaces. This discourages dripping from the nozzle.
3
2
1
5
1-click functionality / operates the
sprayer/device.
Indicates the power, sprayer and
electrostatics are on.
Located on the front of the sprayer.
Handle position for ambidextrous use.
Connect line consists of four components,
electrical line, liquid line, air line and
stainless steel braided cable.
| 7