CYP CH-506TX Manual de operação - Página 8
Procurar online ou descarregar pdf Manual de operação para Extensor CYP CH-506TX. CYP CH-506TX 16 páginas. Hdmi/ir/rs-232 over single cat5e/cat6 extender
Também para CYP CH-506TX: Manual de operação (16 páginas), Manual de operação (13 páginas), Manual de operação (9 páginas), Manual de operação (16 páginas)
Imprimir página
6. OPERATION CONTROLS AND FUNCTIONS
6.1 Transmitter Front and Rear Panels
Front
IR2 Extender
RS232 In
IR1 Blaster
1
2
1
RS232 In: Connect to a PC/laptop or RS-232 enabled device
(with supplied 3.5 mm mini-jack to D-sub 9-pin adaptor) for the
transmission of RS-232 commands.
2
IR2 Extender: Connect to the supplied IR extender cable for IR
signal reception. Ensure that remote control being used is within
the direct line-of-sight of the IR extender.
3
IR1 Blaster: Connect to the supplied IR blaster cable for IR signal
transmission. Place the IR blaster in direct line-of-sight of the
equipment to be controlled.
4
HDMI In: Connect to the HDMI source equipment such as a DVD or
Blu-ray player.
5
DC 5V: Connect the 5 V DC power supply to the unit and plug the
adaptor into an AC outlet.
6
Link LED: The yellow LED will illuminate when both the input and
output CAT5e/6/7 signals are connected.
7
Power LED: This green LED will illuminate when the device is
connected to a power supply.
8
CAT5e/6 Out: Connect to the receiver unit with a single CAT5e/6/7
cable for transmission of all data signals.
3
HDMI In
3
4
Rear
7
DC 5V
Power
Link
5
6
CAT 5e /6 Out
8