CYP CH-506TX Manual de operação - Página 9
Procurar online ou descarregar pdf Manual de operação para Extensor CYP CH-506TX. CYP CH-506TX 16 páginas. Hdmi/ir/rs-232 over single cat5e/cat6 extender
Também para CYP CH-506TX: Manual de operação (16 páginas), Manual de operação (13 páginas), Manual de operação (9 páginas), Manual de operação (16 páginas)
Imprimir página
6.2 Receiver Front and Rear Panels
Front
IR1 Extender
RS232 Out
IR2 Blaster
1
2
1
RS232 Out: Connect to the device that is to be controlled (with
the supplied 3.5mm mini-jack to D-sub 9-pin adaptor) by RS-232
commands.
2
IR1 Extender: Connect to the supplied IR extender cable for IR
signal reception. Ensure that the remote being used is within the
direct line-of-sight of the IR extender.
3
IR2 Blaster: Connect to the supplied IR blaster cable for IR signal
transmission. Place the IR blaster in direct line of sight of the
equipment to be controlled.
4
HDMI Out: Connect to a HDMI equipped TV/monitor for display of
the HDMI input source signal.
5
DC 5V: Plug the 5 V DC power supply into the unit and connect the
adaptor to an AC outlet.
6
Link LED: The yellow LED will illuminate when both the input and
output CAT5e/6/7 signals are connected.
7
Power LED: This green LED will illuminate when the device is
connected to a power supply.
8
CAT5e/6 In: Connect to the transmitter unit with a Single CAT5e/6/7
cable for transmission of all data signals.
HDMI Out
3
4
Rear
7
DC 5V
Power
Link
5
6
CAT 5e /6 In
8
4