Cypress Semiconductor CY7B9910 Ficha de especificações - Página 9

Procurar online ou descarregar pdf Ficha de especificações para Hardware informático Cypress Semiconductor CY7B9910. Cypress Semiconductor CY7B9910 12 páginas. Cypress low skew clock buffer specification sheet

Imprimir página

Operational Mode Descriptions

Figure 2

shows the device configured as a zero skew clock

buffer. In this mode the 7B9910/9920 is used as the basis for a

low skew clock distribution tree. The outputs are aligned and may

each drive a terminated transmission line to an independent

load. The FB input is tied to any output and the operating

frequency range is selected with the FS pin. The low skew speci-

fication, coupled with the ability to drive terminated transmission

lines (with impedances as low as 50 ohms), enables efficient

printed circuit board design.

SYSTEM

CLOCK

Document Number: 38-07135 Rev. *B

Figure 3. Board-to-Board Clock Distribution

REF

TEST

Figure 1

shows the CY7B9910/9920 connected in series to

construct a zero skew clock distribution tree between boards.

Cascaded clock buffers accumulates low frequency jitter

because of the non-ideal filtering characteristics of the PLL filter.

Do not connect more than two clock buffers in series.

REF

TEST

CY7B9910

CY7B9920

LOAD

Page 9 of 11

[+] Feedback