Ashton CPT200 Manual do utilizador - Página 2

Procurar online ou descarregar pdf Manual do utilizador para Sintonizador Ashton CPT200. Ashton CPT200 2 páginas. Clip-on chromatic tuner

POWER ON/OFF
Please ensure that the batteries are inserted correctly.
1. Press 'power' to turn the unit on. Hold down the power button to turn the unit off, and
preserve the current mode parameters.
Function:
The initial setting mode is chromatic tuner (C).
1. To change the mode between tuner and metronome press POWER BUTTON key (1).
2. The metronome function features an A4 range of 410-490 Hz. Press UP key (3) or DOWN
key (4) to calibrate.
3. Pick up mode: CLIP or MIC. Press M/C key (2) to switch pick up mode.
4. Flat tuning: set b-bb-bbb-bbbb by holding down M/C key (2) under tuner mode.
USING TUNER
1. Select your tuning mode by pressing the M/C button. For CLIP, clip your tuner onto your
instrument and play. For MIC, place the tuner close to where you want to tune.
2. Play the note you intend to tune, the tuner will pick up the note and display it. Use the lined
indicator on the left of the screen to correctly tune. The midpoint indicates that it is in tune.
Note: The available tuning notes are (C, C#, D, D#, E, F, F#, G, G#, A, A#, B).
USING METRONOME
1. Press the POWER key to enter the metronome function whilst the tuner is on.
2. Press the M/C key to toggle through various metronome speeds (30-280bpm). You can
manually adjust the metronome tempo by pressing the (+) and (-) buttons.
Note: If there is no operation for 3 minutes, the unit will turn off automatically.
SPECIFICATIONS
TUNER SPECIFICATIONS:
Tuning modes: Chromatic
Detection Range: B0 - B7
A4 Calibration: 410 - 490Hz
Tuning Options: CLIP/MIC
Tolerance: +/-1cent
REPLACING BATTERY
Please pay attention to the polarities of the battery (negative and positive) when inserting.
To change the battery pull out the tray and replace.
The battery for this device is: 3V CR2032 Coin Battery.
METRONOME SPECIFICATIONS:
Tempo: 30 - 280 bpm
Battery: 3V CR2032 Coin Battery