Cyrus CD7Q Instruções para o utilizador - Página 4
Procurar online ou descarregar pdf Instruções para o utilizador para Sistema estéreo Cyrus CD7Q. Cyrus CD7Q 6 páginas.
Imprimir página
Cyrus CD7
Welcome to the world of Cyrus!
Congratulations on your choice of Cyrus Hi-fi products. Our state-of-the-art
design technology and outstanding quality of manufacture has won
countless awards around the world. We are confident that you will derive
great pleasure from owning a product from one of the most recognised
and respected manufacturers of hi-fi equipment.
Please read these instructions carefully before commencing installation.
They provide full guidance to help you install your Cyrus CD7 safely and
correctly.
Preparations for Installation
Before installing the CD7 check that the following items are included in
the accessory box.
•
Warranty Card (with instruction manual)
•
AC Mains Cable
•
Remote Control Handset
•
2 x Phono leads for MC-BUS connection
After removing these items, please retain the packaging.
Install the CD7 in a well ventilated location away from sources of high
temperature, dust or humidity. Never stand the CD7 under another unit or
on any surface likely to hamper its cooling or ventilation.
INSTALLATION
(Refer to Fig.1
Key to the rear panel drawing:
1. Audio Outputs
2. Digital Output
3. MC-Bus System
Connecting to the System Amplifier
Connect a suitable stereo RCA phono interconnect to the audio output
sockets a of the CD7 and the corresponding input of the amplifier or
receiver. Amplifier inputs suitable for this purpose are CD or AUX inputs.
Dual outputs are provided for convenient connection to multiroom units or
for direct connection to tape/disc recorders etc.
DO NOT connect the CD7 to the PHONO input of the amplifier, as this
could damage your amplifier or speakers.
Connecting an External D/A Converter
The CD7 provides a digital output to drive an external D/A converter.
Using a digital interconnect, connect the socket marked DIGITAL OUT b
to the input of a suitable D/A converter and connect the converter's audio
outputs to a suitable input of the amplifier.
Refer to the D/A converter handbook for guidance.
Connecting a Cyrus PSX-R
The Cyrus PSX-R is a high quality regulated power supply, the use of
which will elevate your CD7 into a true world-class state-of-the-art
product.
The connector fitted to the umbilical cable from the PSX-R must be
securely connected to the PSX-R socket d on the rear of the CD7. When
correctly fitted, the connector will latch into the socket.
Note: The PSX-R power supply and the CD7 will both require connection
to the mains supply.
Mc-Bus System Connection (Optional)
By using the MC-BUS connection on your CD7, a highly functional
integrated system with full remote control may be set up. This feature is
usable if you own a Cyrus amplifier. Refer to the relevant product
handbook for MC-BUS wiring instructions.
2
)
4.
PSX-R Connection
5. Power Inlet
OPERATION
(Refer to Fig.2)
Key to the front panel drawing:
6. CD Loading Door
7. Standby Key
8. Standby Light
9. Remote Eye
10. Display Window
11. Stop/Open
12. Memory Store
Switching On
The mains power to the CD7 should normally be left on unless left
unattended for a long period when the mains power at the wall socket
should be switched off or the product disconnected from the AC supply.
When power is applied, the STANDBY key g is used for power control.
The Standby light h shows red when the CD7 is in Standby and green
when operational.
Loading a Disc
Press the STOP/OPEN key 1! to open the CD tray. Place a CD in the tray
with the label side upward. Press the STOP/OPEN key 1! again. The CD
tray will load into the player. The CD7 display will show 'Reading' while
checking the contents of the disc.
Playing a Disc
Press the PLAY/PAUSE key 1* on the front panel. Playback will
commence from track 1 unless otherwise selected.
Pausing
Press the PLAY/PAUSE key 1* to pause the current track. The disc will
be held at the precise point of interruption and the PAUSE symbol will
show on the display. Press the PLAY/PAUSE key 1* again to resume
playing the disc.
Fast Forward/Reverse
The SEARCH FORWARD 1$ and SEARCH REVERSE 1% keys may be
used to locate a specific point within a track. The search will commence
initially at a slow speed increasing after a few seconds if the key is held
down.
The Search keys will also search through next or previous tracks if held
down long enough.
Previous/Next Track Selection
Pressing the NEXT 1^ or PREVIOUS 1& keys allow you to change forward
or backward through the tracks on the CD. Track indications appear on
the display.
Repeat
The REPEAT key 1# can be used to replay the entire disc or programmed
tracks.
When REPEAT is selected, its symbol shows on the display. Press the
key a second time to clear Repeat.
If a program selection has been stored, the REPEAT key 1# will allow
continuous play of this program sequence.
Stop/Open Key
When a disc is playing, press the STOP/OPEN Key 1! to stop the disc
immediately.
If the disc is already stationary, one touch of the STOP/OPEN key 1! will
open the tray.
User Instructions
13.
Repeat
14.
Search Forward
15.
Search Reverse
16.
Next Track
17.
Previous Track
18.
Play/Pause
GB
GB