Cyrus CD7Q Instruções para o utilizador - Página 5

Procurar online ou descarregar pdf Instruções para o utilizador para Sistema estéreo Cyrus CD7Q. Cyrus CD7Q 6 páginas.

Imprimir página

User Instructions

Program Memory Storage

The CD7 has two program modes – Program and Exclude. Program sets

the CD7 to play the sequence of tracks you like, Exclude sets the CD7 to

skip the tracks you don't like. To set the CD7 to Program or Exclude a

selection of tracks, follow this sequence-

Load a disc.

Press the MEMORY STORE key 1@ once to set Program mode (the

display will read 'Enter Tracks') or twice to set Exclude mode (the

display will read 'Skip Tracks').

Enter the sequence of tracks to be stored (or skipped) with the

remote control numeric keypad. A maximum of 30 tracks may be

stored in the program memory. As each track is entered the display

will show the total playing time for the program. If an error is made

in the programming sequence, pressing the stop key will cancel the

last entry.

When all the tracks have been stored, press the MEMORY key 1@

again (the display will now read 'Program Ready'.

Press play to begin playing the tracks in the programmed sequence.

NOTE:

1. 'MEMORY FULL' indication will show on the display when the

program stored exceeds 30 tracks or a stored program time of 100

minutes or greater.

2. When engaging STOP while a program is stored, an extra press is

needed to clear the memory. Thus:

•

Press STOP once to stop the disc.

•

Press STOP a second time to clear the memory.

•

Press STOP a third time to open the tray.

•

One continuous press will accomplish all operations.

FRONT PANEL DISPLAY

Key to the Front Panel Display drawing:

38. Track Display (Two Digit)

Track number, disc reading and error display.

39. Mode Indicator

Indicates the current operation mode (play, pause etc.)

40. Time Display

When the disc is stopped this indicates the total time.

When the disc is playing, either elapsed time for the current track or

time remaining to the end of the disc 4! will be shown.

42. Repeat Indicator

This symbol indicates that repeat is set.

43. Memory Display

Indicates when a program is stored in the memory.

44. Text display area

For status messages.

Operating the Cyrus Audio Commander

The CD7 is supplied with the Cyrus Audio Commander remote control which

will control Cyrus amplifiers and tuners in addition to the CD7.

NOTE: It is necessary to press the CD key once to prepare the Audio

Commander to control the CD7.

Keys 19-26 operate a Cyrus amplifier

19. Select the AV input

20. Select CD or TU inputs

21. Select AU1 or AU2 input

22. Select TP1

23. Adjust Volume

24. Select BALANCE

25. Select MUTE

26. Switch OFF all Cyrus units

(Refer to Fig.4)

(Refer to Fig.3

If CD or TU inputs have been selected with the Audio Commander, the

following keys 27-37 will control the CD7 or the Cyrus FM7/FM7.5 Tuner-

27. Select Play ..............................................................................Cyrus CD7

28. Select Pause...........................................................................Cyrus CD7

29. Numeric Keypad .......................................................Cyrus CD7 & Tuner

30. Store a Program......................................................................Cyrus CD7

Store a Preset ...................................................................... Cyrus Tuner

31. Select FAST FWD / REV ........................................................Cyrus CD7

Auto tune - SEEK UP / DOWN ............................................ Cyrus Tuner

32. Select STOP / EJECT.............................................................Cyrus CD7

33. Select NEXT/PREVIOUS track...............................................Cyrus CD7

Select Preset UP / DOWN ................................................... Cyrus Tuner

34. Switch Display On / Off.............................................Cyrus CD7 & Tuner

35. Set Absolute Phase ................................................................Cyrus CD7

36. Select Elapsed Time / Time remaining...................................Cyrus CD7

37. Select MONO / STEREO..................................................... Cyrus Tuner

Additional Remote Control Functions

Direct Access Numeric Keypad

Press any numeric key 2( on the handset. The track number will appear

on the display and the CD7 will scan and play the selected track. If the

disc has more than ten tracks the CD7 will briefly wait for entry of a

second digit when appropriate.

When a program is stored, the keypad will enable access only to tracks

included in the program memory.

Display Control

Press the DISPLAY key 3$ on the handset to switch the display of the

CD7 off. Pressing this key again restores the display to its normal mode.

Switching the display off stops the digital traffic required to update it and

reduces the load on the power supply. This improves the overall quality of

the sound without adversely affecting the normal functions of your CD7.

Phase Control

Absolute phase is determined by the audio system and the recording

process. Changes in absolute phase are subtle and are best established

from the listening position. The absolute phase of the audio signal can be

changed from the remote control using the PHASE key 3%. The display

text area will show the message 'Phase Normal' or 'Phase Invert'.

The performance of the CD7 is unaffected whether the signal is in normal

or phase inverted mode.

Note : When an external D/A converter is used, absolute phase correction

is not applied to the digital output. Phase correction must then be

selected at the D/A converter.

Time Display Selection

The TIME key 3^ features selection of two time display modes.

Mode 1

Elapsed time display 4). The time display will read the time

)

elapsed from the beginning of the current track.

Mode 2

Remaining time display 4! with minus sign. The time display

reads time remaining to the end of the disc or program if

stored.

Cyrus CD7