Blueshape Energy inside PWS-RUGGED Manual de Instruções - Página 6
Procurar online ou descarregar pdf Manual de Instruções para Gerador portátil Blueshape Energy inside PWS-RUGGED. Blueshape Energy inside PWS-RUGGED 16 páginas. Power station for v-lock and 3-stud lithium ion batteries only
Imprimir página
Introduction
The BLUESHAPE Power Station concept is a convenient system to
integrate the power of multiple V-lock batteries into a unique source
that can be tapped anywhere, anytime as a simultaneous dual DC
voltage output. Moreover, the PWS-RUGGED doubles up as a
powerful
battery
simultaneously at 4A each (65W). A user can carry the unit on the
field during the day and power up his equipment indefinitely if an
adequate supply of batteries is available. Later on or at night time,
he can re-charge his batteries, 4 at a time in the comfort of his hotel,
office or studio.
Depending on which batteries are installed, the quad PWS-
RUGGED system can supply power as follows:
-
Up to 560W out with 4x HD or HDplus models
-
Up to 490W out with 4x standard models
The internal electronics are highly efficient operating at not less than
90% especially when delivering full loads. Such efficiency permits
the PWS-RUGGED to remain cool even after hours of continuous
operation. This feature ensures a safe and prolonged system
reliability and lifetime.
The batteries on channels 1-4 are hot-swappable and enable the
unit to provide uninterrupted power even when a battery becomes
empty. The user will just need to monitor the capacity decrease of
the batteries through the LCD display provided and replace as
necessary without needing to switch off the unit.
Power is available from the 6 side XLRs as follows:
Selectable: 28V
-
2 x 3 pin female XLRs for 28V/ 560W max output (20A)
Selectable: 48V
-
2 x 3 pin female XLRs for 48V/ 560W max output (10A)
Always present
6
-
2 x 4 pin XLRs for 14V 340W max output (24A)
Inside (lid open) there is also a twin USB charger for mobile phone
top-up.
The display on the PWS-RUGGED will show each battery's
individual state of charge and the total real time power being
generated by the unit. This display makes it therefore, very easy to
monitor the unit during operation and understand what output, it is
delivering.
charger
capable
of
charging
4
batteries