Blueshape Energy inside PWS-RUGGED Manual de Instruções - Página 9
Procurar online ou descarregar pdf Manual de Instruções para Gerador portátil Blueshape Energy inside PWS-RUGGED. Blueshape Energy inside PWS-RUGGED 16 páginas. Power station for v-lock and 3-stud lithium ion batteries only
Imprimir página
Interpretation of the Display
Upon switch on (at least one battery on any channel must be
present), the display lights up, showing the installed Firmware
versions.
From then onwards, the screen will interchange between 2 different
data displays. The interval between screen interchanges is
approximately 3 seconds.
The first screen will display as follows:
Column #1
Column #2
Column #3
Column #4
The state of charge of each installed battery is shown in percentage.
When BLUESHAPE batteries are powering the unit, this value is
very accurate and is read and updated in real time through the
dialogue between the battery and the unit since they are using the
same protocol. It therefore represents a true value of the remaining
capacity.
Battery no. (1 through 4)
An asterisk is shown when batteries are not
communicating with the unit
Battery remaining capacity in percentage
(100%=full, 0%=empty)
8 bar current contribution meter
The bars represent the PERCENTAGE
contribution of the channel versus a maximum
possible of 10A for that channel
Actual power mode selected, 28V/48V and
power outputs for 24V/48V and 14V supplies
simultaneously
9