Ambifuego KALIDO77 Instruções de utilização, instalação e manutenção - Página 12

Procurar online ou descarregar pdf Instruções de utilização, instalação e manutenção para Lareira de interior Ambifuego KALIDO77. Ambifuego KALIDO77 16 páginas.

Imprimir página

USER INFORMATION

Press and hold the SET button until the P1 is displayed, and the

time flashes. Set the hour by pressing the (▲) and set the minutes by

pressing the (▼) .

Briefly press SET button for the next burner cycle time.

Once all 4 times are set, press OFF to complete programming.

Manual Override

The system has a "Manual Override" feature that allows manual

operation without battery power. For manual operation, turn the

override knob to the "MAN" position. There is an opening that allows

access to the magnet stem, this should be pushed in to allow gas to

pass to the pilot. This stem must be held in whilst the Piezo igniter *

is depressed to spark the Pilot. The stem must be held in for a further

15 seconds until the pilot light establishes. If the Pilot does not hold

when the stem is released, repeat the process.

When the pilot is established, the "Override" Knob may be turned to

the "ON" position. Control of the gas is then possible using the

second control.

To turn the appliance off using the manual override, flip the "ON-

OFF" switch.

Please note * - The Manual Piezo Igniter is only available if

purchased as an optional Extra, however the manual "ON-OFF" and

Manual flame height setting is always available.

INSTALLER INFORMATION

Simple Version Up and Lower control only

This requires no external electrical power to operate. The receiver

unit has a unit that has only one lead. This lead has two plugs (of

Receiver

different sizes), these will plug into the two spade plugs on the front

the two items. Provided that the distance between the receiver and

handset is less than 10m, the system will work.

The receiver unit can be hidden away under or behind the fire,

ensure that the receiver is located in an area that has a temperature

below 60ºC, and that the customer knows where the receiver is for

future battery replacement.

Check the system.

Battery Cover

Lead

of the Gas Control

unit.

Install the batteries

into the receiver and

the handset; these

will be 4 x 1,5V AA

alkaline and 9V PP3

alkaline respectively.

This

Receiver/Handset

works using sound

waves, and as such

no direct line of sight

is required between