Amdi TECH-SCAN32 PLUS Инструктивный лист - Страница 3
Просмотреть онлайн или скачать pdf Инструктивный лист для Сканер Amdi TECH-SCAN32 PLUS. Amdi TECH-SCAN32 PLUS 7 страниц.
Печатать страницу
SELECTING SCAN MODE:
NOTE: The SCAN Mode switch is located next to the ON/OFF Volume Switch, and is labeled MODE. The Scan Mode
switch is a 3- way rocker switch that operates left, center and right (see diagram – BACK VIEW).
Linear Mode: Single switch scanning only
1.
Set the scan MODE switch to the Left position, the Tech-Scan 32 Plus ECU is in the LINEAR mode.
2.
Plug the external User Switch into the jack on the back the Tech-Scan 32 Plus ECU labeled Switch Input 1.
When the External User switch is activated, the LED will scan sequentially (message 1, message 2...message 32 and then
3.
return to message 1).
4.
When the LED on the grid for the desired message is lit, depress the External user switch and the message and ECU function
will play.
Row/Column scanning Mode:
Single switch Row/Column scanning:
1.
Set the scan MODE switch to the Center position, the Tech-Scan 32 Plus ECU is in the ROW/COLUMN mode.
2.
Plug the external User switch into the jack on the back of the Tech-Scan 32 Plus ECU labeled Switch Input 1.
3.
When the external User switch is activated, the LEDs will scan through each ROW (ROW-1, ROW-2, ROW-3 and ROW-4).
When the desired ROW is lit, activate the external User switch and the Tech-Scan 32 Plus ECU will sequentially scan each
message in that Row (COLUMN-1, COLUMN-2... COLUMN-8 and then back to Column-1). When the desired message is
lit activate the external User switch and the message and ECU function will play.
Double switch Row/Column scanning:
1.
Set the scan MODE switch to the Center position, the Tech-Scan 32 PlusECU is in the ROW/COLUMN mode.
2.
Plug the external User switches into the jacks on the back of the Tech-Scan 32 Plus ECU labeled Switch Inputs 1 and 2 (any
switch plugged into the jack labeled Switch Input 2, the Tech-Scan 32 Plus ECU automatically goes into the Double switch
scanning mode).
3.
Activating the external User switch plugged into the jack labeled Switch Input 1 all the LEDs in ROW 1 will light. To
advance to the next ROW activate the external User switch again that is plugged into jack Switch Input 1. Each time the
external User switch plugged into jack labeled Switch Input 1 is activated, it will advance to the next ROW, from ROW 1 to
ROW 4 and then back to ROW 1. When the desired ROW is lit, press the external switch plugged into the jack labeled
Switch Input 2, then the LED in Column 1 of that ROW will light. To advance the LED to light in the next Column, activate
the external User switch plugged into Switch Input 1. Each time the external User switch that is plugged into Switch Input 1
is activated, it will advance the LED to the next Column (COLUMN-1, COLUMN-2... COLUMN-8) and then back to
Column 1 again. When the desired Column or message is lit, activate the external User switch plugged into jack labeled
Switch Input 2 and the message and ECU function will play.
Step scanning mode:
Single switch Step scanning:
1.
Set the scan MODE switch to the Right position, the Tech-Scan 32 Plus ECU is in the Step mode.
2.
Plug the external User switch into the jack on the back of the Tech-Scan 32 Plus ECU labeled Switch Input 1.
3.
When the external User switch is activated, the LED will sequentially advance every time the external switch plugged into
the jack labeled Switch Input 1 is activated. When the desired message is lit, do not activate the external User switch and in a
short time the message will play (the delay time for when the message plays after the external User switch is not activated
will depend on what the Scan Speed is set (see Select Scan Speed below for time delays).
Double switch Step scanning:
1.
Set the scan MODE switch to the Right position, the Tech-Scan 32 Plus ECU is in the Step mode.
2.
Plug the external User switches into the jacks on the back of the Tech-Scan 32 Plus ECU labeled Switch Inputs 1 and 2 (any
switch plugged into the jack labeled Switch Input 2, the Tech-Scan 32 Plus ECU automatically goes into the Double switch
scanning mode)..
3.
Activating the external User switch plugged into the jack labeled Switch Input 1 to start the scanning will light the first LED
and then each time the external User switch plugged into the jack labeled Switch Input 1 is activated, it will sequentially
advance the LED from 1 to 32 and then back the LED 1. When the desired LED or message is lit, activating the external User
switch plugged into the jack labeled Switch Input 2 will play the message and ECU function.