10Bar Underwater Housing Руководство пользователя - Страница 11

Просмотреть онлайн или скачать pdf Руководство пользователя для Аксессуары для фотоаппаратов 10Bar Underwater Housing. 10Bar Underwater Housing 15 страниц. Underwater housing for olympus e-pl2
Также для 10Bar Underwater Housing: Руководство пользователя (16 страниц)

Maintaining the O-rings
The O-ring is the main seal in keeping sea water out of the housing. It is an effective barrier only if the
O-ring is properly maintained. The O-ring should be inspected before every dive. The following
information is provided for your guidance in using and maintaining the O-ring.
There are two O-rings, one on the lid and one on the housing, which require regular maintenance.
Remove the O-rings periodically for inspection.
It is not necessary to remove, clean and re-install the O-rings after every dive provided the O-rings are
not contaminated.
If the housing is to be opened between dives for changing memory card or re-charging battery, make sure
the outside of the housing is thoroughly towel dried before opening.
After servicing the camera, replace the lid right away.
Before replacing the lid, check the O-rings and O-ring recesses, making sure that no contaminants such
as dust, hair, salt, sand etc., has fallen onto them.
The O-rings should be inspected every time the lid is opened and maintenance carried out only if
necessary.
11