10Bar Underwater Housing Kullanıcı Kılavuzu - Sayfa 11
Kamera Aksesuarları 10Bar Underwater Housing için çevrimiçi göz atın veya pdf Kullanıcı Kılavuzu indirin. 10Bar Underwater Housing 15 sayfaları. Underwater housing for olympus e-pl2
Ayrıca 10Bar Underwater Housing için: Kullanıcı Kılavuzu (16 sayfalar)
Sayfayı YazdırMaintaining the O-rings
The O-ring is the main seal in keeping sea water out of the housing. It is an effective barrier only if the
O-ring is properly maintained. The O-ring should be inspected before every dive. The following
information is provided for your guidance in using and maintaining the O-ring.
•
There are two O-rings, one on the lid and one on the housing, which require regular maintenance.
Remove the O-rings periodically for inspection.
•
•
It is not necessary to remove, clean and re-install the O-rings after every dive provided the O-rings are
not contaminated.
•
If the housing is to be opened between dives for changing memory card or re-charging battery, make sure
the outside of the housing is thoroughly towel dried before opening.
•
After servicing the camera, replace the lid right away.
Before replacing the lid, check the O-rings and O-ring recesses, making sure that no contaminants such
•
as dust, hair, salt, sand etc., has fallen onto them.
The O-rings should be inspected every time the lid is opened and maintenance carried out only if
•
necessary.
11