Aero-Spa AP 1000 Руководство по установке - Страница 7

Просмотреть онлайн или скачать pdf Руководство по установке для Диспенсер для воды Aero-Spa AP 1000. Aero-Spa AP 1000 13 страниц.
Также для Aero-Spa AP 1000: Руководство по установке (12 страниц)

Печатать страницу

Aero-Spa AP 1000 Руководство по установке

Figure 4: GFCI Outlet

DANGER: Improper installation of the grounding

plug can result in a risk of electric shock.

Do not modify the plug provided; if it will not fit the outlet, have the

proper outlet installed by a qualified electrician. This product is for use

on a nominal 120-volt circuit. No adapter should be used with this

product. This product has an automatic thermal limiter, which shuts

off the entire product when an elevated temperature condition exists.

When the product cools it will automatically restart. Only if required,

obtain a UL outdoor rated extension cord. Never locate the Aero-Spa

generator closer than 10' from the hot tub. In the event of a power

outage, the GFCI device will need to be reset manually.

Occasionally GFCI breakers will experience nuisance tripping. This

will shut off the power to the equipment. If this occurs, press the

"reset" button. If pressing the "reset" button does not start the

equipment, unplug the cycle timer and press the "reset" button again.

If the "reset" button does not "hold in", replace the GFCI breaker. If

the button does "hold in", plug the generator power cord into the GFCI

breaker and circumvent the cycle timer. Press the "reset" button

again. If the "reset" button does not "hold in" replace the GFCI

breaker. If the "reset" button does "hold in" contact Aero-Spa™.

Do not operate this equipment without a GFCI breaker installed.