Canon AE-1 Руководство по процедурам установки - Страница 45

Просмотреть онлайн или скачать pdf Руководство по процедурам установки для Цифровая камера Canon AE-1. Canon AE-1 48 страниц.
Также для Canon AE-1: Начало работы (2 страниц), Руководство по эксплуатации (22 страниц), Руководство (42 страниц), Руководство (12 страниц), Руководство по эксплуатации (22 страниц)

3) From the back of the front cover, remove the fixing

screw, and detach the spanners [I].

1) Open the front cover; then, from the back of the

front cover, remove the fixing screw, and detach the

spanners [I].

Adjusting the Height

1) Loosen the two fixing screws [ l ] each on the front

and rear casters on the pickup side of the finisher.

2) To increase the height of the finisher and the punch-

er unit, t u r n the adjusting bolt [2] in the direction of

the arrow A (A full

turn

of the adjusting bolt will in-

crease the height of the finisher by 1.75 mm.). Refer

to the index while turning the bolt, and perform this

for both front and rear casters.

3) To decrease the height of the finisher and the

puncher unit, t u r n the adjusting bolt [2] in the direc-

tion of the arrow B (A full

t u r n

of the adjusting bolt

will decrease the height of the finisher by 1.75

mrn.). Refer to the index while turning the bolt, and

perform this for both front and rear casters.