Canon Color imageCLASS MF8180c Руководство по работе с сетью - Страница 14

Просмотреть онлайн или скачать pdf Руководство по работе с сетью для Принтер "все в одном Canon Color imageCLASS MF8180c. Canon Color imageCLASS MF8180c 49 страниц. Color laser copier - printer - scanner - fax - network capabilities
Также для Canon Color imageCLASS MF8180c: Руководство по эксплуатации пульта дистанционного управления (40 страниц), Краткое руководство по эксплуатации (25 страниц), Руководство по эксплуатации (35 страниц)

Preparation for Protocol Settings

Before you specify the machine's protocol settings, it is necessary to specify the

machine's IP address to enable communication between the machine and your

computers. You can use any of the following to specify the settings. Specify the

settings using the easiest method.

•

The machine's operation panel

•

The ARP/PING commands

•

NetSpot Device Installer (Canon utility software included in the User Software CD)

IMPORTANT

•

In the following operations, the machine's MAC address is necessary. To check the MAC

address from the machine's operation panel, print a USER DATA LIST. (Refer to Chapter

6, "Reports and Lists," in the Facsimile Guide.)

•

Before you perform the following operations in this section, check that the machine is ON

and connected to the network.

•

If you are using ARP/PING commands, the following steps directly allocate the IP

address to the machine. For this machine, in addition to direct allocation of the IP

address to the machine, you can use DHCP, BOOTP, or RARP to specify the IP address.

When the machine is started or reset, it checks whether DHCP, BOOTP, or RARP is

being used, and then allocates an IP address using the first available setting method.

Because the machine's IP address is automatically allocated at this time, it is not

necessary for you to perform the following operations in this section. However if you are

reallocating the IP address, or if DHCP, BOOTP, or RARP is not used, perform the

following operations.

Preparation for Protocol Settings

2-3