American Time SiteSync IQ Руководство по установке и эксплуатации - Страница 4

Specifications

Dimensions: ...............................10

Weight: ........................................4.8 lbs

Voltage Input: .............................120vac, 11 mA

Operating Temperature: .............41˚-131˚F (5˚-55˚C)

Termination: ................................Screw terminals

Receiver Specifications

Frequency: ..................................450-470MHz (factory set)

Paging Format: ...........................POCSAG, narrow band

Data Baud Rate: ..........................512 BPS

Sensitivity: ..................................10uV/M

Channel Spacing: ........................12.5 KHz

Tone Durations: ..........................1-9 seconds and one minute increments (set by the SiteSync

IQ® system controller)

Output Signal Specifications

Rated Output: ................ Adjustable from 0-1.15 volt P-P

Load Impedance: .......... 600 ohms or higher

Controls: ........................ Gain control - Screwdriver adjustment

Inputs: ........................... T1-T4 four dry contact inputs for tone selection. The Audio In input

allows normal background audio to play. Pre-empted by tone selection

Part # H004313

"h x 12

"w x 4"d

• Steady tones and Whoop last for the duration of the

contact input.

• Pulsed tones are 0.4 seconds ON and 0.4 seconds OFF

with a one second break before repeating.

• A two pulse tone repeats every 2.5 seconds for the

duration of contact input.

• A three pulse tone repeats every 3.25 seconds for the

duration of the contact input.

• The Chime sounds once when the contact is closed and

again when the contact is opened.

Wireless Tone Generator

inputs T1-T4.