DoorHan SHAFT-50 Руководство по установке и эксплуатации - Страница 5
Просмотреть онлайн или скачать pdf Руководство по установке и эксплуатации для Открыватель ворот DoorHan SHAFT-50. DoorHan SHAFT-50 12 страниц.
Также для DoorHan SHAFT-50: Руководство по установке (12 страниц)
Печатать страницу
3. OPERATOR UNIT
4. OPERATOR INSTALLATION
4.1. Tools
1
2
1. Set of spanners
2. Set of slotted and cross screwdrivers
3. Set of drills for metal
WARNING! Make sure, that the door is in good working condition and the torsion springs balance the door leaf before installation. Install the
operator as described below (see par. 4.2 or 4.3).
4.2. On-shaft installation
•
Install mounting bracket on the wall using screws. The mounting bracket can be installed from the left or from the right of the operator.
•
Install the first closing ring on the door shaft.
•
Install the operator on the door shaft (make sure, that the bushing key is in proper position) and screw it to the mounting basis.
•
Install the second closing ring on the door shaft and push it close to the operator.
•
Install the first closing ring close to the operator and fix both closing rings.
Closing ring
3
4
4. Set of drills for concrete
5. Pliers
6. Hacksaw for metal
Bushing key
Operator
Closing ring
Fastening bolt
1. Release cord
2. Manual chain
3. Motor
4. Limit switches
5. Reducer housing
6. Limit switches
7. Manual drive unit
5
6
7. Electric drill
8. Tape measure (folding rule)
Closing ring
Bolt (M10)
OPERATOR UNIT
7
8
Shaft
5