Ametek JOFRA IPI Руководство по регулировке - Страница 5
Просмотреть онлайн или скачать pdf Руководство по регулировке для Испытательное оборудование Ametek JOFRA IPI. Ametek JOFRA IPI 12 страниц. Industrial pressure calibrator
Печатать страницу
Use the Pressure Standard to output 500.00 psi (100%). After the
output has stabilized, press the ENTER key to continue. As the unit
takes readings, the screen will show -------. When the readings are
complete the screen should look as shown in the illustration that follows.
Use the Pressure Standard to output 437.50 psi (87.5%). After the
output has stabilized, press the ENTER key to continue. As the unit
takes readings, the screen will show -------. When the readings are
complete the screen should look as shown below.
Use the Pressure Standard to output 375.00 psi (75%). After the output
has stabilized, press the ENTER key to continue. As the unit takes
readings, the screen will show -------. When the readings are complete
the screen should look as shown below.
437.50
CAL MODE
375.00
CAL MODE
312.50
CAL MODE
PSI
PSI
PSI