Canon Microfilm Scanner 400 Руководство по эксплуатации - Страница 21

Просмотреть онлайн или скачать pdf Руководство по эксплуатации для Сканер Canon Microfilm Scanner 400. Canon Microfilm Scanner 400 34 страницы. Compact film scanner

Печатать страницу

Automatic adjustment

Press the AE key on the keyboard or operation panel, so that the

lamp above the key comes on. The MS400 adjusts the print den-

sity automatically.

Even when using automatic adjustment, you can still

use the Print Density Adjustment keys to fine tune the

setting. The Print Density display changes accordingly.

You can fine tune to 17 different levels.

Manual adjustment

Make sure that the lamp above the AE key is off. (If necessary,

press the AE key so that the lamp goes off.) Then adjust the den-

sity by pressing the appropriate Print Density Adjustment key (right

arrow or left arrow) on the keyboard or operation panel. The Print

Density display changes accordingly, with rightward movement

indicating higher density. You can set to any of 33 levels.

5. Set the paper size that you want to print.

If you use Fileprint 250, please select paper size set on

the Paper Tray.

(1) Press the Clear/stop key and keep on for about 5 seconds to

enter the paper size setting mode. At that time, the current paper

size appears on the print display.

Letter

Legal

(2) When pressing plus (+) key of the print number setting key,

the display is changed in due order as

the other hand, when pressing minus (-) key, the display is changed

in due order as

(3) Press the Clear/stop key to define paper size that you want to

use.

If you use Fileprint 400, please select the Paper Cas-

sette or Paper Tray you want to use.

The paper size to be set on the paper tray will be se-

lected by a service technician at the installation of

Fileprint 400.

(1) Press the Clear/stop key and keep on for about 5 seconds to

enter the cassette select mode. At that time, the current paper cas-

sette appears on the print display.

Print display

Tray selection

Multipurpose tray selected

Upper cassette selected

Lower cassette selected

OPERATING PROCEDURES

. On