Daewoo electricals HEA1200 Руководство по эксплуатации - Страница 6
Просмотреть онлайн или скачать pdf Руководство по эксплуатации для Нагреватель Daewoo electricals HEA1200. Daewoo electricals HEA1200 9 страниц. 2000w flame effect stove heater
Печатать страницу
Safety Cut – Out
Warning:
cut-out is activated the unit stops working, unplug the heater from the
mains and check that the air intake area is not blocked or covered.
Leave for an hour to cool and reset before plugging back into the mains.
Technical Data
Voltage
Rated power
Model Number
Electrical Connections
This appliance is fitted with a fused three-pin plug to BS 1363. If the plug
has to be removed, it should be cut off and carefully disposed of
immediately. To avoid a possible shock hazard, do not insert the discarded
plug into a mains socket.
Fitting a new plug
The mains lead must be connected as shown below. The wires are coloured
with the following code - Brown wire = Live (L), Blue wire = Neutral (N),
Green & Yellow = Earth (E).
The Blue wire must be connected to the terminal marked N or coloured Black.
The Brown wire must be connected to the terminal marked L or coloured Red.
This appliance is fitted with a built in safety cut-out, if the
:
220-240V ~ 50Hz
:
2000 W
:
HEA1200
Connect
Green &
Yellow to
Earth (E
)
Connect
Blue to
Neutral (N)
Connect
Brown to
Live (L)
Ensure the outer sheath of the mains
lead is securely held by the cable clamp