Daewoo electricals HEA1200 사용 설명서 - 페이지 6

{카테고리_이름} Daewoo electricals HEA1200에 대한 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Daewoo electricals HEA1200 9 페이지. 2000w flame effect stove heater

Safety Cut – Out

Warning:

cut-out is activated the unit stops working, unplug the heater from the

mains and check that the air intake area is not blocked or covered.

Leave for an hour to cool and reset before plugging back into the mains.

Technical Data

Voltage

Rated power

Model Number

Electrical Connections

This appliance is fitted with a fused three-pin plug to BS 1363. If the plug

has to be removed, it should be cut off and carefully disposed of

immediately. To avoid a possible shock hazard, do not insert the discarded

plug into a mains socket.

Fitting a new plug

The mains lead must be connected as shown below. The wires are coloured

with the following code - Brown wire = Live (L), Blue wire = Neutral (N),

Green & Yellow = Earth (E).

 The Blue wire must be connected to the terminal marked N or coloured Black.

 The Brown wire must be connected to the terminal marked L or coloured Red.

This appliance is fitted with a built in safety cut-out, if the

220-240V ~ 50Hz

2000 W

HEA1200

Connect

Green &

Yellow to

Earth (E

)

Connect

Blue to

Neutral (N)

Connect

Brown to

Live (L)

Ensure the outer sheath of the mains

lead is securely held by the cable clamp