Dot-Spot eco 230 V Руководство по эксплуатации - Страница 8

Просмотреть онлайн или скачать pdf Руководство по эксплуатации для Ландшафтное освещение Dot-Spot eco 230 V. Dot-Spot eco 230 V 12 страниц.

Technical data

Spot

tension

power consumption

light color

luminous flux

radiation angle

cable

protection class

Observe applicable safety regulations for installation. The spot runs on 230 V electrical

power. To avoid danger, separate the dot-spot eco 230 V spot from the power supply

before any work. The spot can not be opened. Connect the spot only if the electrical rating

specified on the safety contact socket matches your main power socket rating.

High ambient temperatures impact the LED's life expectancy. In order to ensure the LED's long life

it is advisable to make sure of adequate heat conduction. Therefore do not run the spot in ambient

temperatures > 50°C.

Tight sealing of the spot can only be guaranteed if the outer sleeve of the connecting cable is

undamaged and the connecting cable is clamped in a water tight manner. Otherwise, penetrating

moisture can reach and destroy the spot's electronics, due to the capillary effect. Spots with dam-

aged power connection cable should absolutely not be operated.

Unpack the whole scope of delivery and check the content, which depends on the scope, for com-

pleteness and integrity.

Dispose of any packaging material you no longer require in line with local regulations. If you notice

any transport damage, please contact immediately the dealer from whom you purchased the spot.

Use a suitable tool to ram the ground spike into the ground. When using a metal hammer, put a

piece of wood or something in between to protect the ground spike.

Then screw the mounting bracket of the light onto the ground spike with the enclosed M6 x 10 mm

screw and snap ring. The snap ring is placed between the screw head and the mounting bracket.

Align the mounting bracket before tightening.

230 V 50 Hz

6 W

warmweiß, 2700 K

408 Lumen

35°

5 m

IP 67

80 mm

100 mm