DAGE-MTI CCD-100 Руководство пользователя - Страница 11

Просмотреть онлайн или скачать pdf Руководство пользователя для Камера безопасности DAGE-MTI CCD-100. DAGE-MTI CCD-100 17 страниц. Camera system

CCD for extended periods of time. The external gate pulse is

placed on the GATE connector pin as shown in the timing

diagram below. The camera has an internal pull-up resistor,

so only a ground closure is necessary. Figure 5 shows the

exact relationship between CCD readout and composite

video. The gate pulse transitions must occur before the CCD

transfer for gating or readout to occur. Figure 6 shows the

gate pulse relationship to video output.

Figure 5: Timing between CCD readout and Video

Figure 6: External Gate Timing and Video Readout