DAGE-MTI CCD-100 사용자 설명서 - 페이지 11

{카테고리_이름} DAGE-MTI CCD-100에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. DAGE-MTI CCD-100 17 페이지. Camera system

CCD for extended periods of time. The external gate pulse is

placed on the GATE connector pin as shown in the timing

diagram below. The camera has an internal pull-up resistor,

so only a ground closure is necessary. Figure 5 shows the

exact relationship between CCD readout and composite

video. The gate pulse transitions must occur before the CCD

transfer for gating or readout to occur. Figure 6 shows the

gate pulse relationship to video output.

Figure 5: Timing between CCD readout and Video

Figure 6: External Gate Timing and Video Readout