Double K Industries Challengair 2000EVAC Руководство по эксплуатации - Страница 3
Просмотреть онлайн или скачать pdf Руководство по эксплуатации для Средство для ухода за домашними животными Double K Industries Challengair 2000EVAC. Double K Industries Challengair 2000EVAC 4 страницы. Dryer/vac for animals
Печатать страницуPlace Screw Driver Tip Between Clip and
Plastic Brush Body. Rotate to Separate Tab
from Brush.
Detail A
Brush Assembly
6
Flag Connector
Brush Retainer Bracket
Brush Retainer
Bracket Screw
Congratulations!
CHALLENGAIR 2000PV™
You've just purchased the Double K
which produces warm, high velocity air under pressure to allow you to dry your animal
perfectly. Your new dryer is designed to provide long, reliable service.
Please read this manual carefully and completely before beginning operation of your dryer
and keep this manual in a convenient and safe place for future reference. A warranty card is
included with your dryer and should be lled out completely and mailed to Double K
Industries within 30 days of the purchase date of your dryer to validate your warranty. Online
registration available at www.DoubleKIndustries.com
CHALLENGAIR 2000PV™
Your
has a two year warranty covering the unit against defects in
materials and workmanship. Regular maintenance items such as brushes and lters are NOT
included (see warranty card for complete warranty information). It is also important to retain
your sales receipt as proof of purchase should service ever be needed.
CHALLENGAIR 2000PV™
Your
has one brush-type motor. It is important that the brushes
be changed when they become worn down to prevent damage to your dryer motor (brushes
are maintenance components and are NOT covered under the warranty). We suggest check-
ing the motor brushes after every 600 hours of dryer use. Please see section on BRUSHES in this
manual for instructions.
CHALLENGAIR 2000PV™
A NOTE ABOUT HEAT: Your
CHALLENGAIR 2000PV™
produces heat by a " ow-thru" motor system, meaning the air is
pushed through the motor and is warmed by the natural heat of the motor that occurs during
operation. This means greater electrical savings and e ciency for you. The dryer will reach its
maximum air temperature after about 2-4 minutes of operation. (Note: The higher the room
temperature, the warmer the air from the dryer will be.)
ASSEMBLY
To attach hose to dryer: Your dryer hose has a black hose adapter that will screw onto the hose
in a counter-clockwise motion. The adapter with hose attached then ts onto the dryer with a
half-twist motion that locks the adapter onto the dryer.
First, place the adapter inside the snout of the dryer by aligning the slots on the adapter, to the
bolt that runs through the inside of the dryer snout. Turn the adapter until it locks in place and
cannot be pulled out. Reverse this process to remove the adapter from the dryer.
To use the dryer as a vacuum, remove the adapter from the front of the dryer and insert it into
the hole at top center of the black end cap. Turn the adapter until it locks into place and cannot
be pulled out.
To remove hose from adapter: Turn the hose clockwise (reverse threading).
ATTACHMENTS: Your dryer is equipped with one hose, 2 twist-on nozzles, 1 nozzle extension
and 1 compression t nozzle. To attach nozzles to hose, twist the nozzles counter-clockwise.
Twist clockwise to remove. See Attachment Guide on page 8.
OPERATION
Switches and Controls:
1. 2-Speed:
a.
Low Speed / Standard Heat - Turn on the top motor switch.
b.
High Speed / High Heat - Turn on both motor switches.
2. Variable Speed (optional)
a.
Maximum Output - Turn the dial speed control clockwise to its maximum.
Variable Output - Turn the dial speed control clockwise to desired air output.
b.
c.
O Position - Turn the dial speed control counter-clockwise until it clicks o .
Forced Air Dryer & Vacuum,
has no heating element. The
3