Double K Industries Challengair 2000EVAC Kullanım Kılavuzu - Sayfa 3

Evcil Hayvan Bakım Ürünü Double K Industries Challengair 2000EVAC için çevrimiçi göz atın veya pdf Kullanım Kılavuzu indirin. Double K Industries Challengair 2000EVAC 4 sayfaları. Dryer/vac for animals

Sayfayı Yazdır

Place Screw Driver Tip Between Clip and

Plastic Brush Body. Rotate to Separate Tab

from Brush.

Detail A

Brush Assembly

Flag Connector

Brush Retainer Bracket

Brush Retainer

Bracket Screw

Congratulations!

CHALLENGAIR 2000PV™

You've just purchased the Double K

which produces warm, high velocity air under pressure to allow you to dry your animal

perfectly. Your new dryer is designed to provide long, reliable service.

Please read this manual carefully and completely before beginning operation of your dryer

and keep this manual in a convenient and safe place for future reference. A warranty card is

included with your dryer and should be lled out completely and mailed to Double K

Industries within 30 days of the purchase date of your dryer to validate your warranty. Online

registration available at www.DoubleKIndustries.com

CHALLENGAIR 2000PV™

Your

has a two year warranty covering the unit against defects in

materials and workmanship. Regular maintenance items such as brushes and lters are NOT

included (see warranty card for complete warranty information). It is also important to retain

your sales receipt as proof of purchase should service ever be needed.

CHALLENGAIR 2000PV™

Your

has one brush-type motor. It is important that the brushes

be changed when they become worn down to prevent damage to your dryer motor (brushes

are maintenance components and are NOT covered under the warranty). We suggest check-

ing the motor brushes after every 600 hours of dryer use. Please see section on BRUSHES in this

manual for instructions.

CHALLENGAIR 2000PV™

A NOTE ABOUT HEAT: Your

CHALLENGAIR 2000PV™

produces heat by a " ow-thru" motor system, meaning the air is

pushed through the motor and is warmed by the natural heat of the motor that occurs during

operation. This means greater electrical savings and e ciency for you. The dryer will reach its

maximum air temperature after about 2-4 minutes of operation. (Note: The higher the room

temperature, the warmer the air from the dryer will be.)

ASSEMBLY

To attach hose to dryer: Your dryer hose has a black hose adapter that will screw onto the hose

in a counter-clockwise motion. The adapter with hose attached then ts onto the dryer with a

half-twist motion that locks the adapter onto the dryer.

First, place the adapter inside the snout of the dryer by aligning the slots on the adapter, to the

bolt that runs through the inside of the dryer snout. Turn the adapter until it locks in place and

cannot be pulled out. Reverse this process to remove the adapter from the dryer.

To use the dryer as a vacuum, remove the adapter from the front of the dryer and insert it into

the hole at top center of the black end cap. Turn the adapter until it locks into place and cannot

be pulled out.

To remove hose from adapter: Turn the hose clockwise (reverse threading).

ATTACHMENTS: Your dryer is equipped with one hose, 2 twist-on nozzles, 1 nozzle extension

and 1 compression t nozzle. To attach nozzles to hose, twist the nozzles counter-clockwise.

Twist clockwise to remove. See Attachment Guide on page 8.

OPERATION

Switches and Controls:

1. 2-Speed:

Low Speed / Standard Heat - Turn on the top motor switch.

High Speed / High Heat - Turn on both motor switches.

2. Variable Speed (optional)

Maximum Output - Turn the dial speed control clockwise to its maximum.

Variable Output - Turn the dial speed control clockwise to desired air output.

O Position - Turn the dial speed control counter-clockwise until it clicks o .

Forced Air Dryer & Vacuum,

has no heating element. The