Amphenol APC Series Установка продукта - Страница 12

Просмотреть онлайн или скачать pdf Установка продукта для Кабели и разъемы Amphenol APC Series. Amphenol APC Series 13 страниц.

Печатать страницу
Amphenol APC Series Установка продукта
2:
Product assembly continues
Step 4:
Install contacts
As shown in Figure 3, insert the crimped terminal and cable from the end of the connector according to the holes
required by the customer. lf you hear a click, the terminal is installed in place. Gently pull the cable and ensure that
the terminals are properly installed.
Step 5:
Install receptacle
As shown in Figure 4, install the socket onto the panel, taking care to select a suitable panel size
(as shown in Figure 5) to avoid installation errors or product failure.
PIN CONTACT
RECEPTACLE
PANEL
Figure 4
Figure 3
SOCKET CONTACT
PLUG
Size 8 Receptacle Panel Cut-out
Size 11 Receptacle Panel Cut-out
Figure 5
12