Amphenol Tempsonics Level Plus LLE Руководство по эксплуатации - Страница 11
Просмотреть онлайн или скачать pdf Руководство по эксплуатации для Передатчик Amphenol Tempsonics Level Plus LLE. Amphenol Tempsonics Level Plus LLE 20 страниц. Magnetostrictive liquid level transmitters with temposonics technology
5.6 Technical data
Level Output
Voltage
Current
SSI (Synchronous Serial Interface)
CANbus
IO-Link
Measured value
Measurement parameters
Resolution
Inherent accuracy
Repeatability
Temperature Output
Measured Variable
Accuracy
Output
Operating conditions
Operating temperature
Humidity
Ingress protection
1
Shock test
Vibration test
EMC test
Design/Material
Sensor electronics housing/Flange
Sensor rod
Stroke length
Operating pressure
Mounting
Rigid Pipe
Electrical connection
See next page
1/ The IP rating is not part of the UL recognition
0...10 VDC or 10...0 VDC, 0...10 VDC and 10...0 VDC (controller input resistance RL > 5 kΩ)
4...20 mA or 20...4 mA (minimum / maximum load: 0 / 500 Ω)
Binary or Gray, 24 or 25 bit
CANopen: CIA standard DS 301 V3.0 / encoder profile DS 406 V3.1, CAN System ISO-11898
V1.1, 32 bit signed, COM3 (230.4 kBaud)
Product Level and/or Interface Level
0.1 mm
+/- 0.5 mm
≤ ±0.005 % F.S. (minimum ±20 μm)
Single point temperature
Class A RTD
PT100 RTD
−40...+75 °C (−40...+167 °F)
90 % relative humidity, no condensation
IP67 / IP69K (correctly fitted)
100 g (single shock) IEC standard 60068-2-27
15 g / 10...2000 Hz IEC standard 60068-2-6 (resonance frequencies excluded)
Electromagnetic emission according to EN 61000-6-3
Electromagnetic immunity according to EN 61000-6-2
The sensor meets the requirements of the EU directives and is marked with
Stainless steel 1.4305 (AISI 303); option: Stainless steel 1.4404 (AISI 316L)
7 mm (0.28 in.) rod Ø: Stainless steel 1.4301 (AISI 304)
10 mm (0.39 in.) rod Ø: Stainless steel 1.4404 (AISI 316L)
156...2646 mm (6.2...104.2 in.)
7 mm (0.28 in.) rod Ø: 300 bar (4351 psi), 450 bar (6527 psi) peak
10 mm (0.39 in.) rod Ø: 350 bar (5076 psi), 530 bar (7687 psi) peak
NPT (3/4", 1", 1.5", 2", 2.5", 3", 4"), ANSI RF Flange (2", 3", 4", 5", 6") (150#, 300#, 600#)
I
11
I
Level Plus
LLE
®
Operation Manual