Caraudio-Systems RL-UCON22-TF Руководство - Страница 6
Просмотреть онлайн или скачать pdf Руководство для Автомобильная видеосистема Caraudio-Systems RL-UCON22-TF. Caraudio-Systems RL-UCON22-TF 7 страниц. Interface for activation of factory rear-view camera input for uconnect 5“ or 8,4“ system with 22 pin connector
Печатать страницу
2.2.
Connections to rear-‐view camera
Harness
TV)DG22
1
Connect the video RCA of the rear-‐view camera to the female RCA connector of the
harness TV-‐DG22.
Connect the white cable of harness TV-‐DG22 to the camera power supply (+12V max
2
500mA). The white cable gets power when reverse gear is engaged. By leaving the
rear camera level the power is switch off again.
3. Coding of the rear-‐view camera
1. Set DIP switch "2" to "OFF" position
2. Turn on ignition
3. Wait until the head-‐unit has booted
4. Set DIP switch "2" to "ON" position
5. After a short time makes the system a reset and the coding operation is complete
4. Activation of rear-‐view camera
The rear-‐view camera activate automatically whenever the reverse gear is engaging.
Version 01.04.2015
+12V%camera power%(max.%500mA)
1
Rear)view1camera
2
RL-‐UCON22-‐TF