Doyson S 10 FM Руководство пользователя
Просмотреть онлайн или скачать pdf Руководство пользователя для Блок управления Doyson S 10 FM. Doyson S 10 FM 2 страницы. Control module with bluetooth
Печатать страницуS 10 FM BT USER MANUAL
Nr. of channels...................................1 stereo channel
Amplifier..............................................1.5+1.5W stereo
Bluetooth............................................A2DP transmission protocol
Minimum load impedance................8 ohms
Power supply......................................12Vcc/330mA
Stand-by power consumption........25mA
Operational power consumption..69mA
Connectors.........................................Strip terminals
Dimensions.........................................44 x 44 x 36mm depth
HOW TO SWITCH ON AND OFF THE CONTROL MODULE: Press the
control module on/off key. The FM/CH two-colour led will light up to show the
control module is on. Press again the on/off key to switch the control module off.
SELECTION OF CHANNEL 1, FM RADIO AND PRE-SET RADIO STATIONS:
Press the FM/CH key to select the channel 1, FM radio or M1, M2, M3 and M4
pre-set radio stations. The two-colour led will light up in green colour when the
selected function is channel 1. It will light up in red colour when the FM radio is
the selected function. The leds for M1, M2, M3 or M4 will light up when the selected
function is any pre-set radio station.
RADIO STATION SCAN: Select the FM radio function. Press the scan> key for
automatic upward radio station search. Press the <scan key for automatic downward
radio station search. The automatic scan stops when a new radio station is found.
FM RADIO STATION MEMORIES (M1, M2, M3 AND M4): When listening the
radio station you want to memorize, keep pressed the FM/CH key during 2 or 3
seconds. The M1 led will start flashing. Use the <scan and scan> keys to select the
memory where your want to store the radio station. Keeping pressed again the
FM/CH key during 2 or 3 the radio station will be stored. The corresponding
memory led will flash quickly to confirm this action. Repeat these steps for the rest
of memories.
GENERAL SYSTEM ON/OFF: Pressing simultaneously the on/off and > keys all
the control modules of the multiroom system will switch on.
Pressing simultaneously the on/off and < keys all the control modules of the
multiroom system will switch off.
VOLUME CONTROL: While the control module is on press the > key to turn
the volume up and the < key to turn the volume down.
SLEEP MODE While the control module is on, press the On/Off key to program
ON/OFF AND SLEEP KEY
BICOLOR LED: Channel (red)
and Bluetooth (blue) indicator
VOLUME CONTROL KEYS
FM TURNER, BLUETOOTH
SELECTOR
UPWARD/DOWNWARD
RADIO STATION SEARCH
HEADPHONE SOCKET
AUXILIARY AUDIO INPUT
w w w. d oy s o n . c o m
the switch off time. Time will increase in intervals of 15 minutes up to 60 minutes.
The channel in use led will flash every time the On/Off
switch off time increases 15 minutes. Once the sleep function is on, the On/Off
led will flash every 7 seconds as many times as periods of 15 minutes are left
for the switch off time. To deactivate, keep the On/Off key pressed during 2 or 3
seconds.
HEADPHONE SOCKET: Connect the headphone jack in the control module
headphone socket. The loudspeakers will stop sounding and music will come from
the headphones. When the headphone jack is disconnected form the headphone
socket the speakers will start singing again.
AUXILIARY AUDIO INPUT (IN): Connect the audio player jack in the audio
socket. Automatically the main audio program will stop and the cd player, MP3, etc
connected to the socket will be listened. When the audio player jack is disconnected
from the audio socket, the main audio program will be listened again.
CALL RECEPTION: While the control module is on, calls from any control module
with built-in microphone can be received. The call volume can be adjusted pressing
the < > keys. The call volume is independent from the program volume and will
memorized by the control module.
BLUETOOTH CONNECTION (CODE: 0000) While the control module is
on, press shortly several times the key until the blue led lights up. Then keep
the key hold for a few seconds until the led starts flashing. Now you have a minute
to search 'DOYSON+xxxxxx' on your device, select it to pair them and enter
the code 0000 to activate the Bluetooth connection. For future occasions you
only will need to connect from your mobile with the desired zone, even when the
control module is off.
S o u n d & H o m e
A u t o m a t i o n
CONTROL
MODULE WITH
BLUETOOTH
S 10 FM
key is pushed and the