Doyson S 10 FM Kullanıcı Kılavuzu

Kontrol Ünitesi Doyson S 10 FM için çevrimiçi göz atın veya pdf Kullanıcı Kılavuzu indirin. Doyson S 10 FM 2 sayfaları. Control module with bluetooth

Sayfayı Yazdır

S 10 FM BT USER MANUAL

Nr. of channels...................................1 stereo channel

Amplifier..............................................1.5+1.5W stereo

Bluetooth............................................A2DP transmission protocol

Minimum load impedance................8 ohms

Power supply......................................12Vcc/330mA

Stand-by power consumption........25mA

Operational power consumption..69mA

Connectors.........................................Strip terminals

Dimensions.........................................44 x 44 x 36mm depth

HOW TO SWITCH ON AND OFF THE CONTROL MODULE: Press the

control module on/off key. The FM/CH two-colour led will light up to show the

control module is on. Press again the on/off key to switch the control module off.

SELECTION OF CHANNEL 1, FM RADIO AND PRE-SET RADIO STATIONS:

Press the FM/CH key to select the channel 1, FM radio or M1, M2, M3 and M4

pre-set radio stations. The two-colour led will light up in green colour when the

selected function is channel 1. It will light up in red colour when the FM radio is

the selected function. The leds for M1, M2, M3 or M4 will light up when the selected

function is any pre-set radio station.

RADIO STATION SCAN: Select the FM radio function. Press the scan> key for

automatic upward radio station search. Press the <scan key for automatic downward

radio station search. The automatic scan stops when a new radio station is found.

FM RADIO STATION MEMORIES (M1, M2, M3 AND M4): When listening the

radio station you want to memorize, keep pressed the FM/CH key during 2 or 3

seconds. The M1 led will start flashing. Use the <scan and scan> keys to select the

memory where your want to store the radio station. Keeping pressed again the

FM/CH key during 2 or 3 the radio station will be stored. The corresponding

memory led will flash quickly to confirm this action. Repeat these steps for the rest

of memories.

GENERAL SYSTEM ON/OFF: Pressing simultaneously the on/off and > keys all

the control modules of the multiroom system will switch on.

Pressing simultaneously the on/off and < keys all the control modules of the

multiroom system will switch off.

VOLUME CONTROL: While the control module is on press the > key to turn

the volume up and the < key to turn the volume down.

SLEEP MODE While the control module is on, press the On/Off key to program

ON/OFF AND SLEEP KEY

BICOLOR LED: Channel (red)

and Bluetooth (blue) indicator

VOLUME CONTROL KEYS

FM TURNER, BLUETOOTH

SELECTOR

UPWARD/DOWNWARD

RADIO STATION SEARCH

HEADPHONE SOCKET

AUXILIARY AUDIO INPUT

w w w. d oy s o n . c o m

the switch off time. Time will increase in intervals of 15 minutes up to 60 minutes.

The channel in use led will flash every time the On/Off

switch off time increases 15 minutes. Once the sleep function is on, the On/Off

led will flash every 7 seconds as many times as periods of 15 minutes are left

for the switch off time. To deactivate, keep the On/Off key pressed during 2 or 3

seconds.

HEADPHONE SOCKET: Connect the headphone jack in the control module

headphone socket. The loudspeakers will stop sounding and music will come from

the headphones. When the headphone jack is disconnected form the headphone

socket the speakers will start singing again.

AUXILIARY AUDIO INPUT (IN): Connect the audio player jack in the audio

socket. Automatically the main audio program will stop and the cd player, MP3, etc

connected to the socket will be listened. When the audio player jack is disconnected

from the audio socket, the main audio program will be listened again.

CALL RECEPTION: While the control module is on, calls from any control module

with built-in microphone can be received. The call volume can be adjusted pressing

the < > keys. The call volume is independent from the program volume and will

memorized by the control module.

BLUETOOTH CONNECTION (CODE: 0000) While the control module is

on, press shortly several times the key until the blue led lights up. Then keep

the key hold for a few seconds until the led starts flashing. Now you have a minute

to search 'DOYSON+xxxxxx' on your device, select it to pair them and enter

the code 0000 to activate the Bluetooth connection. For future occasions you

only will need to connect from your mobile with the desired zone, even when the

control module is off.

S o u n d & H o m e

A u t o m a t i o n

CONTROL

MODULE WITH

BLUETOOTH

S 10 FM

key is pushed and the