DPS Telecom NetGuardian 216 G3 Краткое руководство по эксплуатации
Просмотреть онлайн или скачать pdf Краткое руководство по эксплуатации для Сетевое оборудование DPS Telecom NetGuardian 216 G3. DPS Telecom NetGuardian 216 G3 3 страницы.
Печатать страницуDPS Telecom
"Your Partners in Network Alarm Management"
TKP: Resetting a NetGuardian 216 G3 to Factory Defaults
If you can't remember your passwords to access a NetGuardian 216 G3,
and have no other means to access the unit, you can manually reset the
unit to factory settings.
Note: If you have a G1 series NetGuardian 216 or 480, see
This techno knowledge paper can help you if:
• You cannot access your NetGuardian 216 G3 due to a forgotten
username/password.
• You have physical access to the NetGuardian
Note: This process will set your NetGuardian back to factory defaults, erasing its alarm database. Do
not proceed if you don't wish to restore your NetGuardian to factory defaults.
__________________________________________________________________________________
__________________________________________________________________________________
Connect to the 216's TTY Interface via the Front Craft Port.
o Start a Hyperterminal Session using the following settings:
9600 baud
8
N
1
Flow control: None
Quick Reference Chart
Troubleshooting Checklist
Techno Knowledge Paper
This
TKP.