Dr. Clark VariZapper 2.0 Руководство - Страница 11
Просмотреть онлайн или скачать pdf Руководство для Средства личной гигиены Dr. Clark VariZapper 2.0. Dr. Clark VariZapper 2.0 15 страниц.
Печатать страницу
The VariGamma 2.0
-
Wobble repetion (see explantion page 4); press wheel to choose how many times you want the
wobble function repeated in the step. Press the wheel to confirm change. Range: 1 - 15.
-
Frequency; This icon appears only when you choose not to enable the wobble funtion. Therefore
you only need to put in one frequency you wish to run in the step. Press the wheel to change the default
frequency of 100'000.0Hz. Use the right/left buttons to move between characters and turn the wheel to
change the nummeric value where
/
-
Low-/High Frequency; If you activate the wobble function you will have to put in a lower
frequency and a higher frequency. The wobble function will play the frequencies between the lower and
higher frequencies. Range: 1 - 999'999.9Hz.
Once you have programmed the first step by completing the second page of the parameters of a step you
can save the step by choosing
4.1.7.2 Options within custom programs (saving, deleting & moving between steps)
The options you have within programming a step will always be displayed at the bottom of the screen in
the grey field:
1. Saving: By completing the second page of a step you will be able to save the step with
and option will only appear when you are on the second page of a Step. After confirming the programming
will end. If you decide to continue programming steps do not save until you have programmed all the steps
you need. Once saved the program will appear in you library for futher options:4.1.7.3 Options for custom
programs (Running program, viewing/altering, transfering & deleting)
2. Deleting: The deleting option only appears when at least one step has been created and continuing with
programming. The delete icon
the wheel step will be deleted. Whiles programming you can only delete one Step after the other. For
deletion of the complete program see: 4.1.7.3 Options for custom programs (Run program, view/alter,
transfering & deleting)
3. Moving between steps: You have the option to move/choose a step faster by using this icon
allows you to choose the Step number you would like to move to. go to the icon and press the wheel to
activate, then rotate the wheel to choose the step you want. Confirm by pressing the wheel.
4.1.7.3 Options for custom programs (Run program, viewing/altering, transfering & deleting)
Once a program has be saved it will appear in the Program Driver (PD) library in the right half of the screen
under Select a program in the Main Menu. Use the VariBase buttons (right/left) to switch between screen
areas. If you select a custom program you will have the following options (Fig. 17f):
1. Run program: Select this option to run the program.
2a. View/alter program (Fig. 17f): Here the parameters of the custom program can be viewed or edited.
Edit by choosing the step you want to edit and then select the editing icon
custom programs (programming frequencies). After the desired change move to the second page of the step
and save changes. Editing is done seperately on each step.
2b. Adding a Step (Fig.17g): When in viewing/altering mode, a step can be added to the custom program
by selecting
and following the steps here: 4.1.7.1 Defining/setting custom programs (programming
frequencies)
3. Transfering ( Send to APP & Send to Card) (Fig. 17f): You have the option to save your custom program
to your account on the VariAPP or to the empty Program Driver Card (mircoSD card). For instruction go to:
4.1.4.1.2 & 4.1.4.1.3 .
4. Deleting custom program (Fig. 17f): Choosing this option will delete the complete custom program from
the VariBase after confriming.
Fig. 17e
is shown. Range: 1 - 999'999.9Hz.
(Fig. 17e) and confirming or move to programming the next step with
will appear in the lower part of the screen. After confirming by pressing
Fig. 17f
. This icon
which
. See: 4.1.7.1 Defining/setting
Fig. 17g
.
11