Draper Premier Инструкции Установка и эксплуатация

Просмотреть онлайн или скачать pdf Инструкции Установка и эксплуатация для Проекционный экран Draper Premier. Draper Premier 7 страниц. 220v premier electric projection screen
Также для Draper Premier: Инструкции по установке и эксплуатации (2 страниц), Инструкции по установке и эксплуатации (2 страниц), Инструкции по установке (2 страниц), Инструкции по установке (4 страниц), Инструкции по установке (2 страниц), Инструкции по установке (2 страниц), Инструкции по установке и эксплуатации (4 страниц), Руководство по установке и эксплуатации (7 страниц)

Печатать страницу
Draper Premier Инструкции Установка и эксплуатация
Premier
Electrically operated projection screen with motor-in-roller

Overview - Components

Junction Box
Section 1 - Removing Shipping Brackets
CAUTION: Shipping support brackets must be removed from bracket
clamps at each end of dowel before initial operation, and before
screen is operated in UP direction.
CAUTION: Raise and lower viewing surface several times to confirm
satisfactory operation. If viewing surface does not operate properly,
turn power off and check electrical connections.
Read and understand all warnings
Contents
Overview - Components ...............................................................................................1
Section 1 - Removing Shipping Brackets
Section 2 - Electrical Connections .............................................................................2
Section 3 - Operation....................................................................................................2
PLEASE READ - Safety Information ............................................................................2
Section 4 - Hanging Screen and Methods of Installation .......................................3
Cable
Exit
(without cover)
Tension
Cable

(Figure 1)

..................................................1
Dowel
1. Remove
1. Remove fasteners
fasteners
from bracket clamps.
from
bracket clamps.
4. Retighten dowel
4. Retighten dowel
endcap screws.
endcap screws.
CAUTION
before beginning installation.
(Page 2 of this document)
Section 5 - Limit Adjustments .....................................................................................4
Section 6 - Tab-Tension Adjustment Procedure ......................................................4
Section 8 - Dimensions ................................................................................................5
Section 9 - Wiring Diagrams: Standard and Quiet Motor .......................................6
INSTRUCTIONS
INSTALLATION & OPERATION
Figure 1
2. Run the screen
2. Run the screen
DOWN to expose
DOWN to expose
dowel screws.
dowel screws.
3. Loosen screws
and remove
shipping bracket.
.........................5
If you have any difficulties installing or servicing your
Premier projection screen, call your dealer or Draper, Inc.
Draper, Inc. | 411 S. Pearl St. Spiceland, IN 47385
draperinc.com | 765.987.7999 | 800.238.7999
|
FORM: Premier_Inst20
© 2020 All Rights Reserved
TOOLS
REQUIRED
PENCIL
POWER DRILL
TAPE MEASURE
LEVEL
HARDWARE
(by others)