Draper 15225 Руководство по эксплуатации - Страница 5
Просмотреть онлайн или скачать pdf Руководство по эксплуатации для Электроинструмент Draper 15225. Draper 15225 16 страниц. 2000w 230v
hot air gun
Также для Draper 15225: Руководство пользователя (16 страниц)
Печатать страницу
4.
INTRODUCTION
4.1 SCOPE
Ideal for paint stripping, thawing etc. It is intended for domestic and light commercial use
only. Any other application is considered misuse.
4.2 SPECIFICATION
Stock No... .......................................................................................................................... 15225
P
a
t r
N
o
. .
. . .
. . .
. . .
. . .
. . .
. . .
Rated voltage .............................................................................................................230V~50Hz
Rated input........................................................................................................................ 2000W
Temperature (approx.)
Setting 1 .....................................................................................................................50ºC
Setting 2 ...................................................................................................................450ºC
Setting 3 ...................................................................................................................600ºC
Air flow volume
Setting 1 ............................................................................................................. 500L/min
Setting 2 ............................................................................................................. 250L/min
Setting 3 ............................................................................................................. 500L/min
Weight (machine only) ..................................................................................................... 0.83kg
4.3 HANDLING & STORAGE
IMPORTANT: Please note this machine is fitted with a safety thermal overload protection. If
the product is used continuously too close to the work piece (i.e. misused) resulting in over
heating and the machine potentially catching fire, the thermal overload protection will be
activated and stop the heating element from operating within the machine. This will cause
the gun to blow cool air until the inner components of the heat gun have cooled sufficiently.
This process takes approximately 2 minutes. Repeat overloading will lead to permanent
damage.
Remember the nozzle will remain hot for sometime - a safe storage location should be used.
Store in a dry location out of the reach of children.
. . .
. . .
. . .
. . .
. . .
. . .
. . .
. . .
. . .
. . .
. . .
. . .
. . .
. . .
. . .
. . .
. . .
. . .
. . .
. . .
. . .
. . .
. . .
. . .
. . .
. . .
. . .
. . .
. . .
. . .
. . .
. . .
. . .
. . .
H .
G
2
0
0
0
F S
5