Draper 83611 Руководство - Страница 14

Просмотреть онлайн или скачать pdf Руководство для Электроинструмент Draper 83611. Draper 83611 20 страниц. Biscuit jointer
Также для Draper 83611: Руководство по эксплуатации (20 страниц)

Печатать страницу

BASIC BISCUIT JOINTER OPERATIONS

Note: Remove the plug from the socket before

carrying out adjustment, servicing or maintenance.

8.4 BLADE REPLACEMENT – FIGS. 4 -5

Remove the blade height/angle adjustment by

loosening knob

until free of the tool.

Remove the four screws

Push and hold the spindle lock button and then turn

tool over to access the underside.

Loosen and remove the blade flange using the pin

spanner

provided.

Carefully pass the blade out through the exposed

base taking care to avoid personal injury on the

sharp edges.

Ensure the lower blade flange has located correctly

on the arbor by making sure the flats on both shaft

and flange are positively engaged.

Install new blade on arbor ensuring the direction of

rotation arrow matches with the arrow underneath

(the blade rotates clockwise when viewed from

above the tool).

Tighten blade flange using the spindle lock button

and pin spanner, when tight reinstall cover plate

and four screws.

8.5 CUTTING – FIG. 6

When the setup has been completed, position the

jointer up to the workpiece. For reference there are

two marks on the front cover plate which indicates

the horizontal centre of the blade

centre of the blade

biscuit size is set, switch on the machine and make

the cut.

Switch off after use.

8.6 DUST EXTRACTION – FIG. 7

The biscuit jointer is equipped with a dust bag for

reducing the amount of airborne dust, the bag

can be removed and an extractor connected

using a stepped powertool adaptor for better dust

extraction. A suitable dust mask should always

be worn.

and sliding mechanism upwards

and cover plate

, and vertical

. When aligned and the

FIG.5

FIG.6

FIG.7

FIG.8

- 14 -