Draper 83611 Руководство - Страница 15
Просмотреть онлайн или скачать pdf Руководство для Электроинструмент Draper 83611. Draper 83611 20 страниц. Biscuit jointer
Также для Draper 83611: Руководство по эксплуатации (20 страниц)
Печатать страницу
9.
MAINTENANCE AND TROUBLESHOOTING
Regular inspection and cleaning reduces the necessity for maintenance operations and will keep
your tool in good working condition.
The motor must be correctly ventilated during tool operation. For this reason avoid blocking the air
inlets. After use disconnect the tool from the power supply and vacuum the ventilation slots.
If the replacement of the supply cord is necessary, this has to be done by the manufacturer or his
agent in order to avoid a safety hazard.
Always unplug the power cable before any maintenance check on this saw.
Danger! Never put lubricants on the blade whilst it is spinning.
Warning! To avoid injury from unexpected starting or electrical shock, unplug the power cable
before working on the saw.
Warning! For your safety, this saw is double insulated. To avoid electrical shock, fire or injury, use
only parts identical to those identified in the parts list, reassemble exactly as original assembly to
avoid electrical hazards.
Caution! DO NOT use solvents on the product. They could make the plastic 'cloudy' and brittle.
Warning! When cleaning, unplug the saw from the outlet to avoid unexpected start-up or electrical
shock.
9.1 SAWDUST
Periodically, sawdust will accumulate under the blade, base and around the switch mechanisms.
This could cause difficulty in the movement of the blade when setting up cutting operations.
Frequently vacuum up the sawdust.
9.2 RECOMMENDED ACCESSORIES
Warning! To avoid injury from unsafe accessories, use only Draper accessories.
9.3 PROHIBITED ACCESSORIES
The use of any cutting tool except saw blades which meet the requirement under recommended
accessories is prohibited. Ferrous and non-ferrous metal cutting and the use of abrasive wheels
are prohibited.
9.4 CLEANING
After use, wipe off chips and dust adhering to the tool with a cloth or the like. Lubricate the sliding
portions with machine oil to prevent rust.
To maintain product SAFETY and RELIABILITY, repairs and, any other maintenance or adjustment
should be performed by your nearest authorised service centre.
- 15 -