Draytek VigorAP 903 Краткое руководство по эксплуатации - Страница 6

Просмотреть онлайн или скачать pdf Краткое руководство по эксплуатации для Беспроводная точка доступа Draytek VigorAP 903. Draytek VigorAP 903 13 страниц. 802.11ac access point
Также для Draytek VigorAP 903: Краткое руководство по эксплуатации (17 страниц), Краткое руководство по эксплуатации (16 страниц), Краткое руководство по эксплуатации (16 страниц)

Installation

This section will guide you to install the AP through hardware / wall-mounting

connection.

For hardware connection, refer to the following steps to connect your devices

correctly.

1. Connect VigorAP 903 to xDSL modem, router, or switch/hub in your

network through the LAN A port of the access point by Ethernet cable.

Note

2. Connect a computer to other available LAN A port. Make sure the subnet IP

address of the PC is the same as VigorAP 903 management IP, e.g.,

192.168.1.X.

3. Connect the A/C power adapter to the wall socket, and then connect it to the

PWR connector of the access point.

4. Power on VigorAP 903.

5. Check all LEDs on the front panel. ACT LED should blink, LAN LEDs

should be on if the access point is correctly connected to the xDSL modem,

router or switch/hub.

You can also connect VigorAP 903 to a Vigor router via

wireless connection. For detailed information, refer to

VigorAP 903 User's Guide.