Form Factor Audio Bi 500 Di Руководство пользователя - Страница 3

Просмотреть онлайн или скачать pdf Руководство пользователя для Усилитель Form Factor Audio Bi 500 Di. Form Factor Audio Bi 500 Di 7 страниц.

WARNING:

T o reduce the risk of fire or electric shock, do not expose the equipment to rain or

responsibility for any damage or injury that results from improper use or

CAUTION: R ISK OF ELECTRICAL SHOCK!

can be lethal. Any work should be performed by qualified personnel only.

1. Read all instructions provided by factory.

2. Follow all instructions provided by factory.

3. Do not use this unit near water.

4. This unit may cause permanent hearing loss. Do not operate for long periods of time at any

level that is uncomfortable.

5. Clean the unit only with a dry cloth.

6. Do not block any ventilation openings. Make sure nothing interferes with the ventilation of the

unit when in use.

7. The unit should be located away from heat sources such as radiators, heat registers, or other

units that produce heat.

Attention! Liquids must not enter into the enclosure through ventilation openings.

9. Use the Power Cord provided by the factory with a grounding type plug with two blades and a

third grounding prong. If the provided plug does not fit into your outlet, consult an electrician

for replacement of the obsolete outlet. Protect the power cord from being stepped on or pinched

particularly at plugs. Only use attachments/accessories specified by the manufacturer.

10. Unplug the unit during lightning storms or when unused for long periods of time.

11. The unit should be serviced by qualified personnel when the power supply cord or the plug has

been damaged, or devise have fallen, or liquid has been spilled into the unit or unit has been

exposed to rain or moisture, or the unit does not appear to operate normally or exhibits a

marked change in performance.

12. Always insure the amplifier is properly grounded. Always unplug the AC power cord before

performing ANY service, and use only the same type and rating when replacing fuse.

13. To avoid damaging your speakers turn off the amplifier power before connecting instrument.

14. Do not use excessive force when handling buttons, switches and controls.

15. Always connect to an AC power supply that meets the power supply specifications listed on the

rear of the unit. E xport units : always insure unit is wired for proper voltage. Make certain

grounding conforms with local standards.

Safety Instruction:

moisture. Form Factor Audio assumes no

service.

This is a high voltage device, and internal voltages

Instructions for safe use: