AND GR Series Руководство по эксплуатации - Страница 16

Просмотреть онлайн или скачать pdf Руководство по эксплуатации для Весы AND GR Series. AND GR Series 20 страниц. Density determination kit applicable analytical balance models bm/gh/hr-i/gr/hr/ha series

Печатать страницу

MEASURING THE DENSITY OF A LIQUID

Assemble the kit as described in the procedure below.

6.1. Assembling the Kit:

Assembled view

Thermometer clamp

For the procedure up to the setting of the

beaker stand, refer to the assembly procedure

for each balance model described in "5.

MEASURING THE DENSITY OF A SOLID".

Attach the thermometer clamp to the beaker

and

insert

thermometer clamp.

Place the beaker on the beaker stand.

Connect the float to the float hook using the

wire. The length of wire must be about 50 mm.

Hook the float hook on the density pan stand.

When the value displayed on the balance is

stable, press the RE-ZERO key to set the

displayed value to zero.

Now the balance is ready for density measurement.

Thermometer

Beaker

Beaker stand

the

thermometer

Float hook

Wire

Float

Density pan stand

Balance weight (depends on the balance model)

into

the

The volume of the

float is printed.

Example: 10.00 g/cm

Approx. 50 mm