ATI Audio DDA416 Руководство по эксплуатации и техническому обслуживанию - Страница 6
Просмотреть онлайн или скачать pdf Руководство по эксплуатации и техническому обслуживанию для Усилитель ATI Audio DDA416. ATI Audio DDA416 14 страниц. Quad 1x4 aes/ebu distribution amplifier and 1x6 clock distribution amplifier
Печатать страницу
OUTPUTS
AES/EBU XLR Outputs 1 through 4, 5 through 8, 9 through 12 and 13 through 16 operate as
independent groups. Also, BNC Outputs 1 through 6 operates as a group. Each or any of these
groups may be driven from the following input sources, as selected via rear panel DIP switches:
1. INPUT 1 AES/EBU
2. INPUT 2 AES/EBU
3. INPUT 3 AES/EBU
4. INPUT 4 AES/EBU
5. AES External Sync Input
6. Word Clock Input
7. AES 1 Frame Clock
It is not necessary to terminate unused outputs, as each is individually isolated. Cable routing
should be kept clear of AC lines and other noise-producing wiring.
FRONT PANEL DISPLAYS AND SWITCHES
POWER
Indicates power is supplied to the DDA and it is turned on.
INPUT FAULT
Indicates a no carrier condition on any of the six inputs, INPUT 1 (AES 1), INPUT 2 (AES 2),
INPUT3 (AES 3), INPUT4 (AES 4), AES SYNC IN (AES Sync) or WORD CLOCK INPUT (WCLK).
INPUT TERM
Indicates whether the input termination is on or off for the source selected by the Source Monitor &
Control switch. Press the INPUT TERM button to toggle the setting. Settings are individual for each
source selected, and are memorized and retained through power outages.
INPUT SAMPLE RATE
Indicates sample rate of the input selected by the Source Monitor & Control switch. Sample rates
from 32 kHz through 192 kHz are displayed when they are within 3% of nominal.
WORD LENGTH
Indicates the Word Length of the selected input signal from 16 through 24 bit.
DDA-‐416/WC106
M anual
6