Andatech AlcoSense AccessPoint Руководство пользователя - Страница 7
Просмотреть онлайн или скачать pdf Руководство пользователя для Испытательное оборудование Andatech AlcoSense AccessPoint. Andatech AlcoSense AccessPoint 12 страниц. Breathalyser
Печатать страницуY ou will see "Fon" . If you press "SW2" again you will see " Fof" .
" Fon" means the device will not switch off automatically and " Fof" means the device will switch off
automatically after 15 minutes of non-use.
3) Pass level (0.01 to 0. 09%BAC)
Press "SW2" until you can see " Lo" on display.
Y ou will see " LO.2" . If you press " SW2" again you will see "LO.3" , "LO.4" and etc.
" LO.2" sets the high level to 0.02%BAC.
This level can be set from 0.01 (LO.1) ~ 0.09 (LO.9) %BAC.
0.01 ~ 0.09 %BAC is equivalent to 0.10 ~ 0.90 g/L and 0.05 ~ 0.45 mg/L
5. Push " SW1" and " SW2" at the same time to save your settings.
How to Check the Number of Tests
Switch off the device and then press "SW1" for a moment.
The number on the display indicates the number of tests conducted on the device:
000
Less than 10 tests
001
Above 10 tests
010
Above 100 tests
100
Above 1000 tests
999
Above 9990 tests
sw①
sw②
sw③
7
Version Number
Date Updated
V1.1
2.12.2015