Andatech AlcoSense AccessPoint User Manual - Page 7

Browse online or download pdf User Manual for Test Equipment Andatech AlcoSense AccessPoint. Andatech AlcoSense AccessPoint 12 pages. Breathalyser

Print Page

Y ou will see "Fon" . If you press "SW2" again you will see " Fof" .

" Fon" means the device will not switch off automatically and " Fof" means the device will switch off

automatically after 15 minutes of non-use.

3) Pass level (0.01 to 0. 09%BAC)

Press "SW2" until you can see " Lo" on display.

Y ou will see " LO.2" . If you press " SW2" again you will see "LO.3" , "LO.4" and etc.

" LO.2" sets the high level to 0.02%BAC.

This level can be set from 0.01 (LO.1) ~ 0.09 (LO.9) %BAC.

0.01 ~ 0.09 %BAC is equivalent to 0.10 ~ 0.90 g/L and 0.05 ~ 0.45 mg/L

5. Push " SW1" and " SW2" at the same time to save your settings.

How to Check the Number of Tests

Switch off the device and then press "SW1" for a moment.

The number on the display indicates the number of tests conducted on the device:

000

Less than 10 tests

001

Above 10 tests

010

Above 100 tests

100

Above 1000 tests

999

Above 9990 tests

sw①

sw②

sw③

Version Number

Date Updated

V1.1

2.12.2015